Imc-networks AccessEtherLinx/4 Bedienungsanleitung PDF herunterladen (Seite 19)

easily upload and store new firmware versions for upgrading multiple devices

with on-board logic installed in, or connected to, an iMediaChassis series.

Using Telnet

Assign the AccessEtherLinX/4 an IP Address or use the default IP Address

10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations

done via the serial port can also be performed using Telnet. Use only one Telnet

session at a time. Do not use an RS-232 serial session and a Telnet session at the

same time.

Use Hyper Terminal to access the CLI (Command Line Interface). The manual will

describe how to do this.

Configuring the AccessEtherLinX/4 to Act as a Simple Media Converter

with a Switch

Use Hyper Terminal to access the CLI (Command Line Interface). The manual will

describe how to do this.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

Imc-networks AccessEtherLinx/4 Bedienungsanleitung Seite 19