Imc-networks iMcV-Giga-FiberLinX-II Bedienungsanleitung PDF herunterladen (Seite 43)

Press

to save the settings.

Type

reboot

The iMcV-Giga-FiberLinX-II is now configured to pass only VLAN ID 13 from the

OPTICS (or UPLINK) port to the DATA port. Untagged packets arriving at the DATA

port (Tags = N) receive a tag (VLAN ID = 13) before being sent out of the OPTICS

(or UPLINK) port. The VLAN ID number used for a port must be different than the

number used for the Management VLAN ID.

DATA:

Untagged

Data

EXT

MGMT:

Untagged

OPTICS:

DATA VLAN ID=13

MGMT VLAN ID=20

1-EXT MGMT=ON

2-DATA=OFF

3-OPTICS=ON

Management of a host unit through the external port requires an IP address on the

host unit. A remote unit connected over the fiber link is managed through the local

unit using internal IP-less communication. If direct IP management of remote units is

required, then DIP switch #3 must be ON and the remote must have an IP address.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Keine Kommentare

Imc-networks iMcV-Giga-FiberLinX-II Bedienungsanleitung Seite 43