IMC Networks iMcV-S2MM Bedienerhandbuch

iMcV-Modules Operation Manual Above illustrations are representative; some minor differences may be present in actual product

7 FiberAlert FiberAlert minimizes the problems associated with the loss of one strand of fiber. If a strand is unavailable, the IMC Networks device at

8 If unsure of how best to implement these features in a specific configuration, please contact IMC Networks technical support at (800) 624-1070 (U.S.

9 Configure Auto Negotiation on an iMcV-LIM by adjusting the DIP Switch setting (for unmanaged modules) or via the management software. Refer to the d

10 IMC Networks Technical Support Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada); +32-16-550880 (Europe) Fax: (949) 465-3020

11 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, whi

12 Certifications CE: The products described herein comply with the Council Directive on Electromagnetic Compatibility (2004/108/EC) For further d

19772 Pauling y Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 y FAX: (949) 465-3020 www.imcnetworks.com © 2010 IMC Networks. All rig

ii FCC Radio Frequency Interference Statement iMcV-S2MM/1250 and iMcV-S2SM/1250 This equipment has been tested and found to comply with the limits for

iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...

1 About the iMcV-Modules iMcV-Modules are SNMP-manageable and install in the modular, SNMP-manageable iMediaChassis series in the unmanaged MediaChass

2 LED Operation Each iMcV-Module features diagnostic LEDs that provide information on features and ports. LEDs on iMcV-PIM (-10) The LED functions ar

3 LEDs on iMcV-LIM The LED functions are as follows: LL Glows green when FX LinkLoss is enabled. LNK Glows green when a link is established on the p

4 Configuration Instructions Many iMcV-Modules have user-configurable features (e.g., FiberAlert, LinkLoss, Auto Negotiation, etc.). Refer to the cha

5 About LinkLoss, FiberAlert, and Pulsing FiberAlert Some iMcV-Modules include advanced troubleshooting features that help locate sile

6 • FO/FX LinkLoss (a.k.a. Fiber LinkLoss or LinkLoss) • TP/TX LinkLoss (a.k.a. Twisted Pair LinkLoss or Reverse LinkLoss) • FiberAlert • Pulsing Fibe